Equipment

Reddick Equipment Company

All of our plasticulture equipment is proudly manufactured at our Reddick Equipment Company facility in Williamston, NC.

Single Row Mulch Layers

Whether you are running a roadside strawberry stand or a multi acre produce operation, Reddick’s line of mulch laying equipment is right for you. We have pulled together some of the best minds in the industry to totally revamp our line of mulch laying equipment with the focus being set on ease of adjustment.

Reddick Single Row Mulch Layer Lineup

RMC-172

The RMC-172 is the flagship of our single row line. This time-tested design recently went through a few manufacturing changes but the basic principles remain the same. It will accommodate up to 60″ plastic and can be customized to fit your operation.

RMC-160

The RMC-160 offers all of the same benefits of the larger, classic mulch laying equipment, just in a compact version so that it can be pulled by a smaller tractor. This is great for smaller farms or U-Pick operations.

  • Features & Benefits:
  • Quality manufacturing with precision laser cut components
  • New simplified design for ease of adjustment
  • Available single drip or double drip tape rolls
  • Adjustable gathering blades
  • Adjustable UHMW lined press pan
  • Replaceable sides on the pans
  • Press pan outfitted with bolt-on kick out wings
  • Adjustable four axis press wheels and covering discs
  • Adjustable plastic roll bed to accommodate a wide range of plastic widths
  • Operator seat mounted on the rear for better access to component
  • Floating crown roller to maximize plastic adherence to the bed

Three Row Pre-Bedders and Mulch Layers

Maximizing productivity starts with eliminating passes across the field. Our line of three row equipment does just that. Many of our customers have experienced the decreased cost and labor that is associated with our three-row line. There are some differences with this process such as the need for a pre-bedder to form the bed ahead of the rigid layers. This is due to the fact that unlike our single row layers the three row rigid machines do not have gathering blades. The pre-bedder is typically used to form/fumigate and the layer follows with the drip and plastic. This process has proven to be the most efficient. Check out our lineup below to see which machines best fit your operation.

Reddick Three Row Mulch Layer Lineup

RMC-372R/RMC-360R

These two models are built tough for the grower that wants to get in and get out. These machine takes the efficiencies of the RMC-172 and RMC-160 and multiplies it by three. These are both rigid frame layers that are setup for growers on 72” or 60” centers. These units are paired with the RMC-372PB and the RMC-160PB pre-bedders.

RMC-372PB/RMC-360PB

These two pre-bedders are used in front of our conventional three row rigid layers to pre-form and incorporate fumigants into the beds in front of the rigid layers. They consist of a tool bar with three sets of gathering blades and three press pans. These usually are outfitted with fumigation knives which are optional. The 372PB is for 72” centers and the 360PB is for 60”.

RMC-372F/RMC-360F

These models are our float frame three row layers that are setup for 72” and 60” centers. These machines were designed for growers who have undulating land and cannot implement a rigid frame machine. These units are essentially three of our single row machines attached independently to three row tool bar. This design allows each unit to move independently when needed to ensure a proper tuck on the plastic. Unlike the three row rigid machines, these units do have gathering blades and do not require a pre-bedder.

  • Features & Benefits:
  • Quality manufacturing with precision laser cut components
  • New simplified design for ease of adjustment
  • Available single drip or double drip tape rolls
  • Adjustable gathering blades
  • Adjustable UHMW lined press pan
  • Replaceable sides on the pans
  • Press pan outfitted with kick out wings
  • Adjustable four axis press wheels and covering discs
  • Adjustable plastic roll bed to accommodate a wide range of plastic widths
  • Operator seat mounted on the rear for better access to components
  • Floating crown roller to maximize plastic adherence to the bed

Mulch Lifters and Pullers

There is no doubt about it, lifting plastic after the season is over is a painful process. Let our line of lifters and pullers give you some relief this year. We have developed this line of time saving equipment that will allow you to get finished with this crop and focused on the next one.

Reddick Mulch Lifter Lineup

RMC-105

This mulch lifter is designed to lift various sizes of mulch with minimum adjustments one row at a time. The concept is simple. Use the dirt lift the plastic and you decrease the opportunity for tearing. The design allows for minimal tuck ripping, for a better lift, saving you time and money.

RMC-305

Just like our mulch layers we understand that time is money. This three-row mulch lifter will help you eliminate costly passes across your field and decrease the compaction of previously lifted plastic. This machine is sold as a 72” center machine but can be adjusted down to a 60” center operation

  • Features & Benefits:
  • Quality manufacturing with precision laser cut components
  • Simplified design for ease of adjustment
  • Adjustable to varying row spacing
  • Cutting coulter to split residue in front shank
  • Lifting fingers on rear of lifting blade
  • UHMW lined frog on foot for increased lift

Reddick Mulch Puller Lineup

RMC-10.5

The RMC-10.5 Plastic Puller is designed to reduce the labor cost of removing plastic mulch and drip tape from your field. This done by winding the plastic up on the internal spindles of the lifter. Once the puller is at capacity you simply drive it to your disposal area and swing the spindle out and release.

Transplanters & Hole Punchers

Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernatur aut odit aut fugit, sed quia consequuntur magni dolores eos qui ratione voluptatem sequi nesciunt. Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet, consectetur

Reddick Transplanter Lineup

RMC-460

The RMC-460 comes standard with a 3-point quick hitch ready, 150 gallon poly tank, two seats, tray racks (18 trays), and one planting wheel. Standard wheel sizes are as follows: 12”, 14”, 15”, 18”, 24”, 30”, 36”, 42”, 48”, & 60”

Additional Options:

  • Extra 3rd Row Rack (Adds 18 Additional Trays)
  • Extra 2 Seat Assembly (To Seat 4 People Total)
  • Additional Planting Wheels
  • Planting Wheel Guide

Reddick Hole Puncher Lineup

RMC-100

The RMC-100 hole punch is equipped with spiked wheels. These spikes are located at your desired plant spacing. The hole puncher rolls over the bed to perforate the plastic mulch film before bare root or plug settings.

  • Features & Benefits:
  • Category I or II 3-point hitch frame
  • 2 to 4 spiked wheels depending on the number of rows
  • Different spike size & spacing according to the type of transplants
  • Adjustable gauge wheels for proper bed alignment
  • Front stands for storage

Trenching Equipment

Now making water furrows in dry ground and draining wet potholes is no problem. Eliminate most shovel work and cut more uniform ditches with Reddick Trenchers. Designed to cut a smooth ditch that can be crossed easily with harvest equipment. Combine headers can remain close to the ground with scooping dirt, as with a plowed drain furrow. Dig ditches with a single or multiple pass using Reddick’s adjustable skid plate. For convenience a built-in parking stand holds the Trencher upright for easy connection to your tractor.

Reddick Trencher Lineup

D7-OS-HYD Offset Hydraulic Trencher

Features & Benefits:

  • Heavy duty hydraulic motor
  • Flow rate: 20GPM, open or closed system
  • Category 1 & 2 Three Point Hitch
  • Inline flow control partitioning valve
  • Full shield deflector
  • Heavy duty tubular steel design
  • Parking stands
  • Adjustable skid plate
  • 3 heat treated carbon steel cutting blades

D4 -C Direct Drive Trencher

Features & Benefits:

  • 18” Cutter wheel, 3 blade
  • Category 1 & 2 Three Point Hitch
  • 55HP PTO Shaft
  • Heavy duty tubular steel design
  • Parking stands
  • Adjustable skid plate
  • 3 heat treated carbon steel cutting blades

D6 -C Offset Trencher with Chain Drive & Clutch

Features & Benefits:

  • Cutter head includes 3 heat treated carbon steel cutting blades
  • Heavy duty oil bath chain drive gear box
  • Category 1 & 2 Three Point Hitch
  • 60HP rated driveline & PTO Shaft
  • Twin disc PTO Clutch
  • Heavy duty tubular steel design
  • Parking stands
  • Adjustable skid plate

Fumigation

Today’s tractors are larger and more powerful than ever. Even the most basic models are equipped with technology that was never dreamed of in the early 60’s when we began this work. Our development team realized that partnering with these advancements was key to the progression of our fumigation equipment.

THE 207-KIT

We have a bolt-on kit that turns the Spudnik Hiller into a fumigation rig so that a grower can get double-duty out of their expensive hiller equipment. This bolt-on 207-Kit, affectionately named after Aroostook County’s area code, has become the standard for Spudnik conversions.

The FlexFume has been successfully adopted in many markets throughout the world and is quickly becoming the standard for in-row non-tarped soil fumigation.

The FlexFume

We saw the need for a machine that could keep pace with the ever-changing scale of new technology. We spent countless hours researching and fine-tuning best practices for the application of our products in a variety of crops. The design needed to be flexible enough to perform in a variety of soil types and adjust to any metric or standard row center. The goal: a one pass system that placed our products 12 inches deep into seed bed ready conditions followed by a compaction device. Three models and four years later we finally hit all of the marks with the FlexFume.

The FlexFume has become one of the most adaptable pieces of fumigation equipment on the market today. It utilizes an independent row unit system. This allows the FlexFume to adapt to the conditions in each row without affecting the others. This design also lends itself to expansion and is not limited to a set row spacing or quantity.

We also have the FlexTill Attachment option. It is a spring bed freshener to cover any concerns of the soil being too hard. This unique feature allows you to replace the FlexFume press pans with a rolling cultivator attachment to freshen the bed without disturbing the fumigated soil. The FlexTill will break down the packed soil for a perfect seed bed prior to planting.

Contact your sales representative for more information on the FlexFume and its full line of options.